Naim Audio announces new premium music streamers

There are three new products - the range-topping ND 555 (above, £12,999), the NDX 2 (£4999) and the entry-level ND5 XS2 (£1999).

Each of the three streamers share a common feature set. This includes embedded Tidal, Spotify Connect and Chromecast (up to 24bit/192kHz). The highest quality input remains the UPnP, which streams up to 32bit/384kHz PCM files and DSD 128. apt X HD Bluetooth and Airplay are also on the menu, as is Roon compatibility.

The ND 555 is, of course, considered the star of the range. As is Naim’s way, every building block of the design was revisited with a view to improving performance, right down to the exact tightness of the bolts that hold the Faraday cage over the streaming module. (A Faraday cage protects the device from stray electrical fields.)

As is traditional for the brand, a lot of effort has been put into optimising the power supply arrangement. The ND 555 has no fewer than 13 of Naim’s DR voltage regulators, each dedicated to feeding the DACs, clocks and output stages with clean, stable power. Unlike the other two streamers, the ’555 needs a dedicated outboard power supply to work - in this case, the 555PS (£6999).

MORE: Naim adds Roon Ready to Uniti range

The streaming module is shared across the range

The streaming module is shared across the range

Apart from the streaming module – something that’s shared across Naim’s recent streaming products – there’s plenty of other interesting technology here. The digital signals are sent around the circuit board using LVDS (Low Voltage Differential Signalling). This way of transferring the data results in faster speeds, reduced noise and jitter, and keeps radiated electrical fields low.

Neat circuit layout inside the ND 555

Neat circuit layout inside the ND 555

Naim has taken a great deal of care with the timing of the digital signal, and has positioned the master clock close to the pair of PCM1704K digital-to-analogue converters (each protected by its own Faraday cage). There’s also a new fourth generation 40-bit SHARC DSP processor, the ADSP 21489, to implement Naim’s RAM buffer and completely remove SPDIF jitter on the connected digital inputs. The processor also performs 16 times oversampling and digital filtering duties

All the main boards are isolated from the casework to reduce the amount of mechanical vibration reaching them. This isolation is achieved using springs, tuned to decouple the boards from all vibration above 10Hz.

The product has a cleaner look than its predecessor, the NDS, and now has a large 5in TFT colour display with a proximity sensor. As part of the company’s upmarket 500 series, the casework matches the understated aesthetics of the rest of the series.

NDX 2 (bottom) uses much of the technology of its big brother, while ND5 XS2 (top) has no fascia display or controls

NDX 2 (bottom) uses much of the technology of its big brother, while ND5 XS2 (top) has no fascia display or controls

The NDX 2 and ND5 XS 2 streamers are progressively less elaborately engineered, not surprisingly – but they still display the same attention to detail when it comes to construction and electronic design. The ND5 XS 2 is a stripped-back design that does without a display or front panel controls altogether, Naim arguing that the optimal interface between user and streamer is via the dedicated app, so the lack of display and controls is no hindrance. It also allows the engineers to optimise the performance for the price. The XS 2 is actually a few hundred pounds cheaper than its predecessor, so the company may have a point.

All three of these players should reach the dealers by summer of this year. We can’t wait to try them out.

MORE:

Naim Uniti Nova review

6 of the best music streamers 2018

Metaxas & Sins’ Phonographic Perambulator turntable: a $35k feast for the eyes

13 best new products at the Bristol Show 2018

Toshiba tape player promises hi-res audio from cassettes

Ketan Bharadia
Technical Editor

Ketan Bharadia is the Technical Editor of What Hi-Fi? He's been been reviewing hi-fi, TV and home cinema equipment for over two decades, and over that time has covered thousands of products. Ketan works across the What Hi-Fi? brand including the website and magazine. His background is based in electronic and mechanical engineering.