4 posts / 0 new
Last post
clarke359's picture
Offline
Last seen: 7 months 5 days ago
Joined: 01/12/2008 - 09:34
Posts: 4
onkyo 818 12v trigger

Can the 12v triggers on the onkyo 818 be used to switch on projector and sub both have trigger inputs

if so how thanks

BenLaw's picture
Offline
Last seen: 8 hours 6 min ago
Joined: 21/11/2010 - 20:21
Posts: 6313
RE: onkyo 818 12v trigger

Definitely should be possible. Connect jack to jack leads between the triggers and then turn them on in the onkyo menu. May need a switch off and on again to start working. 

clarke359's picture
Offline
Last seen: 7 months 5 days ago
Joined: 01/12/2008 - 09:34
Posts: 4
RE: onkyo 818 12v trigger

Hi thanks for that will have a go i found trigger settings in the panasonic menu but can only see blacked out zone controls in the onkyo menu.

 

BenLaw's picture
Offline
Last seen: 8 hours 6 min ago
Joined: 21/11/2010 - 20:21
Posts: 6313
RE: onkyo 818 12v trigger

Check pages 78 and 59 of your manual. It looks like the triggers are designed for control of additional zones. If those zones can be left permanently on (ie they come on when you turn the av receiver on) then you should be fine. 

Log in or register to post comments