Skip to main content

Mission LX-4 Speaker overview

MISSION LX4 W/NUT SPKRS (PAIR)

Manufacturers Product Description

FLOORSTANDING LX Series speakers are smart, practical and affordable, sporting a sharp, classic but modern look in keeping with Mission's customary design focus. Above all, they communicate music with engaging energy and detail, bringing performances to life with all the vibrancy and finesse one expects of Mission speakers. The LX-4 is a two-way design, combining the 25mm Mission tweeter with two mid/bass drivers. The LX-4 floor-stander positions the tweeter between the twin mid/bass drivers in a 'D'Appolito' configuration, rather than above both drivers in conventional fashion, similarly to the LX3. While high performance mid/bass and treble units are the foundation of a great sounding speaker, if the cabinet is not properly reinforced it can be an unruly source of unwanted noise. To prevent this, extensive research and development was carried out by the designers of Mission to ensure internal cabinet robustness, eliminating any unwanted cabinet resonances and vibrations. Using a combination of CAD analysis, a lot of experimentation and extensive listening tests, the cabinet within each speaker has been braced at key points which means that the full frequency range is clear and detailed.

View All

General Information

Manufacturer Website Addresshttp://www.internationalaudiogroup.com
Brand NameMission
Product SeriesLX
Product TypeSpeaker
ManufacturerInternational Audio Group Ltd
Manufacturer Part NumberMH-028316-00B
Packaged Quantity2
Product NameLX-4 Speaker
Product ModelLX-4

Technical Information

Minimum Frequency Response40 Hz
Crossover Type2-way
Sensitivity90 dB
RMS Output Power150 W
Impedance6 Ohm
Maximum Frequency Response30 kHz
Driver Type25 mm Microfiber Tweeter

Physical Characteristics

Form FactorFloor Standing
Weight Approximate18.30 kg
ColourWalnut

‹ Back to Mission products

‹ Back to Mission Hi-Fi