Dali (264308) Component Speakers

Manufacturers Product Description

DALI ALTECO C-1 The DALI ALTECO C-1 is truly a multi-purpose speaker. The perfect fit for adding height information to a surround setup or taking the role as an out-of-the-way stereo speaker. By designing the crossover for stereo use and by keeping a strict focus on DALI sound design principles, we have created a speaker that delivers believable height information from Atmos, DTS-X and Auro-3D movies. DUAL SOUND MODEThe unique angular design combined with the dual sound mode enables this speaker to be used in a multitude of different scenarios. Choose 'UP' on the front baffle switch to beam the sound waves either straight out for a soft downwards angle, or by selecting 'DOWN', beaming the sound almost straight down for close position listening.UP-FIRINGThe angular design of this speaker makes it perfect for up-firing use. Combined with a surround receiver that has the ability to render height information (Dolby Atmos, DTS-X or Auro-3D), placing it on top of the front speakers, and even on top of the rear speakers will offer an excellent ceiling reflected rendering of height information in compatible movies and concerts.WOOD FIBRE CONESOur low-loss drivers uses a mix of low-mass paper cones with wood fibre reinforcement. The embedded wood fibres give the surface an uneven structure, which dramatically minimizes the resonance of the surface. This creates the best possible reproduction of every detail in the audio signal.SOFT DOME TWEETERThe dome tweeter offers best-in-class resolution with an extended frequency response, wide dispersion and low coloration. A clear heritage from our high-end series. The tweeter is based on an ultra-lightweight weaved fabric, which weighs less than half of the market standard (0.056 mg/mm2).

View All

General Information

Manufacturer Website Addresshttp://www.dali-uk.co.uk
Brand NameDali
Product TypeSpeaker
ManufacturerDali
Product LineALTECO C-1
Manufacturer Part Number264308
Product NameALTECO C-1 Speaker

Miscellaneous

Package Contents
  • ALTECO C-1 Speaker
  • Rubber Feet
  • Manual

Technical Information

Minimum Frequency Response74 Hz
Crossover Type2-way
Sensitivity83 dB
RMS Output Power100 W
Impedance6 Ohm
Maximum Frequency Response26 kHz
Driver Type114.30 mm Wood Fibre Woofer, 21 mm Soft Dome Tweeter

Physical Characteristics

Form FactorWall Mountable
Width160 mm
Depth255 mm
Weight Approximate2.80 kg
Height190 mm
ColourWalnut Vinyl
Woofer Diameter114.30 mm
Dimensions190 mm (H): 160 mm (W): 255 mm (D)

‹ Back to Dali products

‹ Back to Dali Hi-Fi