Michell Gyro / Technoarm 2 / Cusis M review

Looks like the old Gyro. Sounds so much better Tested at £9795 / $14,797 / AU$23,700

Michell Gyro / Technoarm 2 / Cusis M turntable package on wooden hi-fi rack in front of bookcase playing vinyl record
(Image credit: © What Hi-Fi?)

What Hi-Fi? Verdict

Michell’s revamped Gyro builds on the original’s solid foundations but moves the game on significantly

Reasons to buy

  • +

    Measured and balanced presentation

  • +

    Impressive detail resolution

  • +

    Excellent build and finish

Reasons to avoid

  • -

    Price puts it up against some tough competition

Why you can trust What Hi-Fi? Our expert team reviews products in dedicated test rooms, to help you make the best choice for your budget. Find out more about how we test.

Michell Engineering was founded in 1966. It started off machining parts and making small models, even building the spaceship Discovery from Stanley Kubrick’s sci-fi classic 2001: A Space Odyssey. There were record players, of course. At first it was parts for the popular Transcriptors decks, and then in 1973, complete co-branded turntables built under licence.

It took another four years for Michell to offer its own turntable design, the Reference Electronic. While that stunning model got the ball rolling, it was the original Gyrodec released in 1982 that really put the company on the hi-fi map.

The Gyrodec’s innovative skeletal structure and attention to cosmetic detail set it apart from the more sombre wooden-plinth alternatives. Pleasingly, the Michell’s performance was good enough to match the glamorous appearance.

Latest Videos FromWhat Hi-Fi?

Its design evolved over the decades, with improvements across the board from platter material to bearing design and upgraded power supplies. In 1999, Michell introduced the Gyro SE, a version of the Gyrodec with the expensive acrylic base and hinged lid removed. This not only reduced the cost, but sounded better thanks to reduced structural resonance.

We tested the last version of that deck a couple of years ago and were astonished to find that this decades-old product still competed head-on with the best at its price. But Michell knew it could do better still. The result is the new Gyro we have on test here, which effectively replaces the old Gyro SE and Gyrodec.

Design

Michell Gyro / Technoarm 2 / Cusis M turntable package chassis without platter

(Image credit: What Hi-Fi?)

At first glance it may look much the same as the old model, but almost every aspect of the new Gyro (£5995 / $8999 / AU$13,500) is a step forward from before. Its baseplate is a substantial aluminium piece rather than being made of acrylic, and the chassis – where the main bearing and tonearm attach – is a far more rigid and damped structure.

This new chassis is made from 19mm precision-machined aluminium tooling plate rather than being cast, offering advantages in terms of structural rigidity, manufacturing quality and resonance behaviour.

Michell Gyro / Technoarm 2 / Cusis M tech specs

Michell Gyro / Technoarm 2 / Cusis M turntable package

(Image credit: Michell)

Type Belt drive

Operation Manual

Speeds 33â…“, 45 RPM

Speed change Electronic

Cartridge Michell Cusis M moving coil

Phono stage? No

Bluetooth? No

USB? No

Dimensions (hwd) 17 x 49 x 38cm

Weight 15.5kg

Finishes x 2 (silver, black)

It features ten embedded brass weights that balance the tonearm’s weight and also provide useful damping, something aided by dense foam inserts around the tonearm mount.

The previous generation Gyro used Michell’s clever self-lubricating main bearing. This inverted brass housing/carbon steel shaft design drew oil from a reservoir at the base of the main bearing up to a thrust ball at the top. The oil then returns to the reservoir through a hole drilled into the bearing spindle. This proved effective, but the new model uses a double-helix arrangement to increase oil flow, improving rotational smoothness and lowering noise.

Other engineering highlights include a revamped outboard power supply to improve motor control and carefully designed Sorbothane feet that isolate the deck’s structure more effectively from the supporting surface.

The Gyro’s suspended chassis design further isolates from external vibrations, of course. It is still hung via three easily adjustable springs and has been retuned to bounce at a frequency of 3.5Hz rather than 4.5Hz. There is now also a clever lateral damping system on each of the suspension towers, too. The overall effect is to make the chassis’s movement more stable and controlled than before.

Michell Gyro / Technoarm 2 / Cusis M turntable package on wooden hi-fi rack in front of bookcase

(Image credit: What Hi-Fi?)

Delrin is still Michell’s platter material of choice. It is an acetal homopolymer thermoplastic chosen for its inert nature and mechanical impedance properties (that are similar to vinyl). The claim is that it delivers a more neutral sound than the more common alternatives.

The platter weighs 3.7kg and has a cork/rubber damping ring inset into the underside to absorb internal resonances and any bearing noise. Its outer edge is now smooth rather than grooved, which allows the thin-sectioned rubber drive belt to find its own level.

Gyro tradition is maintained by hanging six gold-plated brass weights around the platter’s circumference to add rotational mass. This aids speed stability and, to our eyes, looks nice too.

A smooth-running DC motor provides the drive. It sits in a chunky aluminium housing, detached from the main turntable structure to reduce the transmission of mechanical vibration.

The motor housing, and that of the external power supply, is machined from a solid aluminium billet for rigidity and greater resistance to RF interference. Speed options are limited to the standard 33â…“ and 45 RPM. The change, thankfully, is electronic rather than manual.

Tonearm & cartridge

Michell Gyro / Technoarm 2 / Cusis M turntable package side view showing tonearm and cartridge playing vinyl record

(Image credit: What Hi-Fi?)

We wouldn’t be surprised if Michell’s Technoarm 2 (£1300 / $1999 / AU$4000) looks just that bit familiar. It started life as a Rega design, but Michell has left very little untouched. The distinctive one-piece arm tube is first shot-blasted to change its resonant behaviour, and then holes, 22 of them, are drilled into the underside to reduce mass without compromising structural integrity. All internal wiring is upgraded to 99.9999% pure silver litz wire, with no internal wiring joins to maintain signal purity.

The underside of the integrated headshell is machined to ensure it is truly parallel to the new low-friction polymer bearings, and even the mounting base is redesigned.

The Michell base offers adjustable arm height, which is useful if you want to swap between different cartridges regularly. Lastly, Rega’s standard circular counterweight makes way for an underhung barrel design that is claimed to improve arm stability and be easier to adjust.

Michell chose to fit the Gyro/Technoarm2 pairing with its Cusis M cartridge (£2500 / $3799 / AU$6200) on our review sample. This moving coil design sits at the top in the company’s four-strong cartridge range and uses a boron cantilever with a Microline stylus tip. It has a carbon-loaded acrylic housing, a material chosen for its blend of rigidity and damping.

The Cusis M tracks securely at 2.0g and works well into the standard moving coil 100-ohm loading. Its lowish 0.25mV output demands a top-quality, low-distortion phono stage, though.

Build & set-up

Michell Gyro / Technoarm 2 / Cusis M turntable package on wooden hi-fi rack side angle showing chassis, platter and brass weights

(Image credit: What Hi-Fi?)

The build quality of this package is excellent, and every part works with reassuring slickness. Previous generation models arrived in bits, waiting for the new owner to assemble them ‘Meccano’ style. Assembly wasn’t hard, though the supplied instructions could have been clearer. We suspect most people would have expected the selling dealer to set things up, and that is perfectly fair given the price.

This new Gyro arrives partially assembled, with only the platter, bearing housing, belt and motor system needing to be attached. The instructions are clear, and it took us a little more than 20 minutes to get up and running. You have to add a few drops of oil into the bearing. The oil is supplied, of course, but it is easy to make a mess if you’re not careful.

Use the supplied record clamp. Without it, the Gyro’s presentation loses some solidity and focus. The shortfall isn’t massive, but in a suitably capable system it will be obvious.

The Gyro’s suspension is easy to adjust, and on our review sample, the cartridge was already installed and adjusted. As with any turntable, optimum results depend on a level, low-resonance support, ideally placed away from the speakers.

A top-class partnering system is a must. We use our Burmester 088 (with moving coil module)/911 MkIII amplifier and ATC SCM50 speakers for the bulk of our testing, but also alternative electronics such as the Cyrus Phono Signature/PSX-R2 phono stage, PMC’s Cor integrated and Audio Research’s LS-2/S-200 pre/power.

Sound

Michell Gyro / Technoarm 2 / Cusis M turntable package close up on cartridge playing vinyl record

(Image credit: What Hi-Fi?)

Let’s cut to the chase. This new Gyro may look a lot like the old one, but the raft of changes has lifted its performance to a significantly higher plane. It retains the older generation’s general sonic characteristics but offers improvements in pretty much every area.

The most obvious benefit is in the overall authority of the presentation. The new Gyro sounds solid and composed in a way that eluded the previous generation model. Play Beethoven’s 9th Symphony, and the sound now has real heft and scale. The orchestra has a solid presence, sounding full-bodied yet wonderfully fluid.

This Michell combination delivers huge dynamic sweeps with control, and has the composure to track a multitude of instrumental strands without sounding confused or stressed. The Gyro’s noise floor is extremely low, giving credence to the company’s claims of lower levels of mechanical noise and reduced structural resonance.

Stereo imaging is another strength, with this Michell record player delivering an impressively expansive soundstage characterised by sharp focus, convincing layering and class-leading stability. Sounds and instruments are locked in position no matter how dense the music gets.

Michell Gyro / Technoarm 2 / Cusis M turntable package on wooden hi-fi rack, with close up on tonearm mounting and counterweight

(Image credit: What Hi-Fi?)

The Gyro’s musical armoury extends to excellent detail resolution. Instruments are richly textured and rendered with finesse. Low-level dynamic shifts come through with clarity and naturalness.

We shift gear to the Bad album by Michael Jackson and the Michell turntable responds with enthusiasm. It delivers the thunderous bassline to The Way You Make Me Feel with verve and ferocity, while conveying Jackson’s vocals with emotional edge intact. The overall presentation is wonderfully cohesive and brimming with energy.

The Michell’s rhythmic drive is better described as surefooted rather than truly hard-charging, but it is still fun. Vertere’s pricier MG-1 MkII is better at communicating the ebb and flow of musical momentum, but by general standards there is little to complain about here.

Verdict

Michell Gyro / Technoarm 2 / Cusis M turntable package on wooden hi-fi rack playing vinyl record, viewed from above

(Image credit: What Hi-Fi?)

Overall, though, this Michell Gyro package is incredibly hard to fault. While it looks much like the previous-generation model, it is no comparison in sound quality. The new model’s performance gains more than justify the significant price increase. If you are lucky enough to have such a budget, you absolutely have to put it on the shortlist.

Review published: 16th November 2026

SCORES

  • Sound 5
  • Build 5
  • Features 4

MORE:

Read our review of the Vertere MG-1 MkII/Mystic

Also consider the SME Model 8

Best turntables: top record players tested by our expert reviewers

Ketan Bharadia
Technical Editor

Ketan Bharadia is the Technical Editor of What Hi-Fi? He has been reviewing hi-fi, TV and home cinema equipment for almost three decades and has covered thousands of products over that time. Ketan works across the What Hi-Fi? brand including the website and magazine. His background is based in electronic and mechanical engineering.

With contributions from

You must confirm your public display name before commenting

Please logout and then login again, you will then be prompted to enter your display name.