6 posts / 0 new
Last post
stavvy's picture
Offline
Last seen: 3 days 13 hours ago
Joined: 11/07/2013 - 14:24
Posts: 132
Pioneer blu ray fuse help!!
English

I hope some of you guys can help me! I had all my av equipment out for a good clean and to make space for my new B&W HTM62 speaker.  It took me longer than I thought due to work commitments to get a chance to put it all back together again and numpty here as got my power cables mixed up  :help:

I am now not sure which "fig. 8" cable I need for my Pioneer BDP-140 blu ray player.  I have found a fig.8 cable with a 5 amp fuse but I dont think this is the right cable and 5amp fuse seems a bit high for a blu ray player? (correct me if I'm wrong).  The manual makes no mention of fuse rating and surprisingly couldnt find anything at all after a quick google.  If someone with the same blu ray wouldnt mind having a check of the ruse rating it would be very much appreciated!!!!

 

Cheers guys!

Pioneer PD30S SACD player, N30S Network Streamer, A50S Amp

Bowers Wilkins 685

bigboss's picture
Offline
Last seen: 49 min 2 sec ago
Joined: 25/03/2009 - 21:40
Posts: 13664
RE: Pioneer blu ray fuse help!!

How many figure of 8 power cables have you got? Are there different types of fuses in each?

stavvy's picture
Offline
Last seen: 3 days 13 hours ago
Joined: 11/07/2013 - 14:24
Posts: 132
RE: Pioneer blu ray fuse help!!

bigboss wrote:

How many figure of 8 power cables have you got? Are there different types of fuses in each?

hi big boss thanks for your help.I seen to have collected spares over the years, I have 2 fig.8s with 5 amp fuses and onewith a 3 amp fuse. Annoyingly I'm pretty sure the ps3 is 5 amp leaving  one 3 amp and one 5 amp fuse for the blu ray. Can't believe it's not in the manual! 

Pioneer PD30S SACD player, N30S Network Streamer, A50S Amp

Bowers Wilkins 685

RobinKidderminster's picture
Offline
Last seen: 17 hours 30 min ago
Joined: 27/05/2009 - 14:24
Posts: 2595
RE: Pioneer blu ray fuse help!!

Be on the safe aide with 3amp. If it blows (unlikely) use 5amp but no more. Otherwise whats the current input?

Yamaha V2065. MS Mezzo 5.1 Panasonic 42. Sony BD. Garrard 86SB. WD Live TV. SkyHD.

http://www.whathifi.com/forum/home-cinema/lounge-hc-signature-update-bass-traps

 

f1only's picture
Offline
Last seen: 1 week 6 days ago
Joined: 07/04/2010 - 09:14
Posts: 1063
RE: Pioneer blu ray fuse help!!

The Pioneer BDP-140 Blu-ray player only pulls 23 watts of power so a 3 amp fuse maximum would be plenty big enough. I have a 3 amp fuse on my TV that pulls around double that power, so no worries.

 

Regards ..

Speakers - Dali Ikon 6 F L/R, Ikon Vocal 2 MK2 Centre, Ikon 1 Surround, B&W 610 Subwoofer. TV - Calibrated Sony 46" HX853. BDP - Sony mr BDPS790, PS3, PS4. A/V Amp - Yamaha RXV 1073

stavvy's picture
Offline
Last seen: 3 days 13 hours ago
Joined: 11/07/2013 - 14:24
Posts: 132
RE: Pioneer blu ray fuse help!!

thanks chaps for your help, i did some quick calculations too and neither the ps3 nor the blu ray pull anywhere near 3 amp.  Think I'll buy some 3 amp fuses and stick them in both just for my own peace of mind!

Pioneer PD30S SACD player, N30S Network Streamer, A50S Amp

Bowers Wilkins 685

Log in or register to post comments