My RX-V3067 does not report all resolutions that my DLP projector supports to the connected HDMI-sources.
More specifically, the 3067 omits to tell a connected DVB-T2 receiver that 576i is a valid resolution to output. So instead, I get 576i->1080i conversion done in the STB. I've tried to set "Monitor Check" to "Skip" in the advanced menu, but to no help. The receiver stills seems to send a limited EDID table to the STB.
I've got FW rev 3.20 and the 3067 is set to output 720p.
Anyone else experienced this or other problems related to "Monitor Check"?
If Rick @ Musicraft is reading;
By reading others threads, I get the impression you might have a good connection at Yamaha. Any possibility you could highlight this problem for them?