Thanks, well whats coming up next?
Not sure, a nice rosewood surround/case for the Decware to finish that off, and maybe some tube rolling on the input tubes (and the Doge 8 Pre).
Speaker wise, I am really happy with the Veravox drivers, I may/may not still go down the OB route with active bass, not sure yet.
A Turntable will be added at some point, when I get round to deciding what I want.
I dont foresee any changes in the Pre/Power combo or CDP at any time in the near future.
Michell Gyrodec SE / RB300 / 2M Blue | Sony DVP-S9000ES
Croft Micro 25 Basic | Decware Zen
Goodmans Axiom 201 / Rega Alya / Keesonic Kolt
No changes, still need to get the Rosewood surround for the Decware done, and looking at finishing off the speakers, possibly build a new cabinet for them. And still need to sort a Turntable.
Well, I was set up for no changes and what has happened?
A few years back I had some massive horns with Fostex FF225K drivers in them, I found a pair of the drivers for sale locally and decided to give them another go. The plan was for a corner horn or similar but whacked them in OB to see what they were like and they are sounding really good at the moment, I have some tweeters to take over from them at around 6-8kHz.
They are around 96-97dB so perfect for the little Zen!
I also seemed to have bought myself a Michell Gyrodec I already have an RB300 and Ortofon MC 10 Supreme Cartridge to go with it when it arrives in the next week or so.
And compared to the Veravox drivers:
And the Fountek JP2.0 Ribbon tweeters:
And the test baffles:
Hey hoops, I spotted the denon PMA 2000 in one of your early posts to this thread. What's your take on it?
Hi Yes, I really liked the PMA-2000AE, if I had more normal speakers that would be where I would look for a full-feature integrated amplifier, its up there with the BIG Sony ES amps IMO.
Posted a question/thread over on the hifi section to you about Kef's 104.2.
I can get a pair reasonably cheap and wondered what your take is on those in the greater scheme of things, downfalls, strengths etc.
I've noticed you didn't keep yours for long.
Pretty ... and pretty proud of it
As mentioned in the 104/2 thread, main reason I did not keep them long term was just they had a few bass issues in my room, other than that they were pretty spot on, one of my favourites of the few many speakers I have had!
Some new toys:
Klipsch Heresy II
I really liked what the OB speakers did, but not sure if I could live with them so far out into the room, much like the Magnepan MMGs, not sure my room is the best shape/size to really take advantage of them. I have had the Heresys on my radar for a long time, and a pair came up for a good price and I thought it would be a good chance to try some more speakers on my long-term to-do-list.
I only picked them up yesterday so no real impressions other than I thought they sounded a little dull/closed in until I realised I was listen at around 10dB lower than I would usually (~55-60dB) acording to the rough SPL meter on my phone, which I have used a lot before. They certainly dont have such a bright treble as some have described, so far anyway.
The cabinet is not the best, I can hear some colouration from that, and possibly some from the bass drivers top end (Lower range of female vocals) but moving them a little away from the walls helped a fair bit.
Plenty of experimentation to be had I think! They have already had the 'upgraded' crossovers and some new Mid-Range compression drivers.
The overall plan is to try and downsize the visual impact of the system, tidy it up a bit.
Well played with the Heresys a bit, but they were just not doing it for me, so embarking on a new project that builds on the strengths of them. A full active DSP speaker with horn mid-tweeter. Should be fun.
So back to my Veravox speakers for the moment, and a new toy was collected today and another Ikea peice to tidy it up a bit:
Stunning photos; beautiful deck. Any plans to upgrade the wooden chopping board?
What classical music are you listening to?
Correct VTA on the RB300 now with the Michell VTA adjuster:
Starting to gather bits for the BIG speaker project:
Volt BM251.3 Mid-Bass drivers:
With my current Veravox 5S wide-range drivers:
Using the MiniDSP board, I will create a modular system with a variety of configurations:
2-way as Below
Volt BM251.3 ~50Hz-800Hz
Radian 850PB / Stereolab 400Hz Tractrix ~800Hz-20kHz (drivers/horns being collected next week)
Or 2/3-way Active Hybrid
Volt BM-251.3 Mid Bass ~50Hz-300Hz
Veravox 5S Wide Range ~300Hz-10kHz
Fountek JP2.0 Ribbons ~10kHz-20kHz (passive supertweeter)
I also have the option, with another MiniDSP 2x4 board to go fully 4-way active in the future too.
Ribbons installed into the veravox cabinets:
And had a lazy weekend, did a bit more CAD on the 3-way idea as above. Not the most detailed models but only spent an afternoon on it.
I will be using a MiniDSP board for the crossover: http://www.minidsp.com/products/minidspkits/2-x-in-4-x-out
It allows me to do real-time advanced crossover funtions, parametric eq, control over input/output limits etc and a wide variety of plug-in software.
There will be two main configurations:
V1 - 2 way using a Volt BM251.3 Mid-Bass (<800Hz) and Radian 850pb compression drivers in a 400Hz Stereolab Tractrix horn (>800Hz)
V2 - 2.5 way using the Volt BM251.3 Mid-Bass (<300Hz) and the Veravox 5S wide range driver (300Hz-~8kHz) with a Fountek JP2 ribbon (passive >8kHz) on top.
First up, the bass cabinet build. It was a flat-pack from Wilmslow Audio based on their 'Tornado' cabinet designed for the 8" and 10" Volt Bass driver. It comes with the cutout/rebate for the driver, and I have changed the port tuning to optomise it for the Volt driver.
Other cabinet and ports:
Assembled and with the little Kolts for size:
Now, V1 will be using the Radian drivers, they are big beasts:
Comparison with the V2 drivers/cabinets:
And this is what it will look like (possibly also on the floor instead of the stands, if that measures OK)
And the V2 cabinet as per the renders:
And showing the test layout with the MiniDSP software, which I have just got working this morning:
So there we have it, now the hard part starts, getting a cohesive design!
It's really interesting reading through your posts, the speakers look great. Look forward to the finished article.
Music: Yamaha MCR-140 / Cambridge Audio Minx Go
Movies: LG 32LN5400 / Sony BDP-S1100
THe V1 configuration has really taken off:
I have started measuring too:
Total Resonse with crossover @1m (Right speaker)
Total Response @ Seating Position (Right, Left and Stereo)
© 2014 Haymarket Publishing