Have your say & ask the experts!

can't counterbalance new cartridge on project debut 3

4 replies [Last post]
simon3102000
simon3102000's picture
Offline
Joined: 1 Oct 2010
Posts: 170

Hi, im not sure if im doing something wrong but ive got the cartridge an ortofon 2m red connected up but when i try and counterbalance it with the weight it wont do it as it needs to be far back and it rests on the small clip thing on the botton of the arm and looks like the weight needs to be over this clip to work??? any ideas?

__________________

imac 2011, Airport express, DacMagic, NAD C326 amp, Wharfedale Diamond 10.1 speakers, Soundstyle Z1 speaker stands, chord cables, Tacima power conditioner. Controlled with my iphone 4S...

nads
nads's picture
Offline
Joined: 29 Nov 2007
Posts: 3179
RE: can't counterbalance new cartridge on project debut 3

Pics? As it sounds like either yo have not read the set up info or there my be something missing.

__________________

Not a HiFi Nut. Just has a pile of Nads.

simon3102000
simon3102000's picture
Offline
Joined: 1 Oct 2010
Posts: 170
RE: can't counterbalance new cartridge on project debut 3

strange, i dont know if i need to buy a new weight, but i think i may of done it, just seemed that the weight had to be right on the end but i managed to get it to float a bit and then twisted it round to the right weight so hopefully it is done correctly.... Ive lined up the cartridge using the bit of alignment paper, the azimuth didnt need adjusting though by the looks of it? time to play some vinyl! shame its so late as i cant blast it out lol.

__________________

imac 2011, Airport express, DacMagic, NAD C326 amp, Wharfedale Diamond 10.1 speakers, Soundstyle Z1 speaker stands, chord cables, Tacima power conditioner. Controlled with my iphone 4S...

Gtncj
Gtncj's picture
Offline
Joined: 25 Nov 2007
Posts: 146
RE: can't counterbalance new cartridge on project debut 3

Hi Simon

 

I had the same problem. The counter weight on the PD3 is to light for a 2M red. You need to buy a heavier counter weight from henleys design they cost £14.00.

Give them a call they are very helpful.

What I done untill i got my heavier weight was to cut a 10mm strip of blue tack and put it around the edge of the weight and cut it so both ends of the blue tack were flush. It worked. But the day after calling Henleys design the new weight came. I asked for next day delivery at a cost ofan extra £5.

 

BR

Gtncj

__________________

Nad 352c, Nad 545 Bee, Yellow Rega P3 24, TT Psu, ISO GT S 2 Subplatter, OM20 stylus, 2M Red, Cambridge Audio 540p, Ipod classic 160gb, Arcam irdock.

Atlas Equator for CD, QED Quinex 2 for irdock, Chord Company Cobra plus for Phono pre amp.

Chord company carnival silver screen bi wire speakers are not bi wired.

Monitor Audio RS6.

Tacima CS929

Sony KDL 32 W5500. Humax freesat. Panasonic DMP BDT110. PS3 320g.

simon3102000
simon3102000's picture
Offline
Joined: 1 Oct 2010
Posts: 170
RE: can't counterbalance new cartridge on project debut 3

Gtncj wrote:

Hi Simon

 

I had the same problem. The counter weight on the PD3 is to light for a 2M red. You need to buy a heavier counter weight from henleys design they cost £14.00.

Give them a call they are very helpful.

What I done untill i got my heavier weight was to cut a 10mm strip of blue tack and put it around the edge of the weight and cut it so both ends of the blue tack were flush. It worked. But the day after calling Henleys design the new weight came. I asked for next day delivery at a cost ofan extra £5.

 

BR

Gtncj

yep cheers, i gave them a ring and they are sending one out to me! Thanks. How are you finding the 2m red? i did have a quick listen last night but at low volume and obviously the counterweight wasnt set properly so i cant come to any conclutions yet but its gotta be better than the factory fitted cartridge.

__________________

imac 2011, Airport express, DacMagic, NAD C326 amp, Wharfedale Diamond 10.1 speakers, Soundstyle Z1 speaker stands, chord cables, Tacima power conditioner. Controlled with my iphone 4S...