3 posts / 0 new
Last post
Roundhead 5000's picture
Offline
Last seen: 3 months 1 week ago
Joined: 13/01/2013 - 16:22
Posts: 97
Pioneer SC-LX86 Software update problems! UE 22 error. Please help!
English

Have just recently moved, was setting up again via full auto Macc. Once complete I am getting a UE 22 error flashing on the display. Have tried to update again (amp connected to internet) but it says I have the latest version, and doesn't give me the option to re install the software/firmware update. Is there any way to overide this or bypass it?
Thanks in advance.

Zarn_Smith's picture
Offline
Last seen: 2 months 1 week ago
Joined: 30/04/2010 - 13:00
Posts: 87
MCACC and UE 22

I know that I am reviving an old thread here but I too also had this problem and thought that I would post a reply on how I resolved it without having to take the amp back to the shop.

 

It seems (even with the lastest firmware) that there are a few bugs in the software driving the SC-LX86. Anyway the same symptoms happened to me. UE 22 suggests that a firmware update has gone wrong even through the last thing done with the amp is an attempt to run the MCACC. Turning the amp off (at the wall) and back on again does not help.

 

What does fix it is a factory reset as per page 80 of the manual.

Roundhead 5000's picture
Offline
Last seen: 3 months 1 week ago
Joined: 13/01/2013 - 16:22
Posts: 97
RE: Pioneer SC-LX86 Software update problems!.

Yep, exactly what I did in the end, and it worked a treat. Been fine ever since :pray:

Log in or register to post comments