Hi. Looking at first amp and demon avr1713 is v cheap at mo. Does the 1713 take a sky+ or any stereo input over HDMI and convert to Dolby prologic
Use digital coax or optical for Dolby Prologic or full Dolby digital 5.1 from SkyHD.
Mordaunt Short Mezzo System C - 8,5,1,9.Yamaha V2065. SonyS570. Panasonic 42in., Sky HD 1TB. Garrard 86SB. PF30. Wii. WDTV Live. Harmony One. STAX300. QED cabling. Galaxy Tab 10.1
System Photos - http://s1051.photobucket.com/user/robinkidderminster/library/?sort=3&page=1
Base trap Project - http://www.whathifi.com/forum/home-cinema/corner-base-trap-completed-project?page=1
Thanks for reply but not looking for it to play that if embedded in source, looking for it to play a standard stereo TV signal as prologic
I'm not aware of any AV receiver converting a stereo signal to true 5.1 Dolby Prologic.
My Home Cinema Pioneer KRP 500A, Yamaha RX-V1900, MA Radius R225HD LCR, R90HD rears, AW12 sub, Panasonic BD60, PS3, Boxee Box, Sky HD, Boxee Box, Logitech Harmony One, Logitech PS3 Adapter, Sonos ZP90
Bedroom Samsung UE32C6510, PS3 slim white, Apple TV, Sonos S5, Sonos ZP90, Audioengine 2, Oppo OPDV971H
Miscellaneous: Synology DS212J + 2 X WD Red 2TB drives, WD 1TB NAS, Sonos ZoneBridge, BT HH3 as modem & AirPort Extreme router
OK. New to this so may be wrong. My blue ray cinema all in one Sony e370 takes the sky HDMI thru arc from TV. I can then change the sound on cinema system from stereo to prologic etc. Looking for the same in this amp
Why? Is not a 'standard tv signal' always DPL?? Never really thought about it but my amp display showa PLII as minimum for all.tv which 'converts' to 5.1 or 7.1 output. No expert but interested now.
A short answer then will be yes.
Is it standard dpl? The spec on 1713 doesn't state it but dies on higher models
Isn't it just "faux" 5.1 - i.e. the amp takes the stereo signal and then processes it into 5.1?
Living Room: Samsung 40C7000; Oppo BDP-103EU; Onkyo SR308; Apple TV3; Airport Express; Sky HD+; Jamo A102 HSC5; Naim Nait 5i-2; Neat Iotas; Chord / Wireworld / QED / TCI interconnects and speaker wire; Harmony 550 universal remote; Tacima mains conditioner Portable: Shuffle (1G); iPad (1G); iPad Minil FiiO E1; AKG450; Grado SR60i; Sennheiser CX300II; custom Ultimate Ears Car: iPod Classic 120GB
Correct, the receiver takes the stereo signal and converts in "on the fly" to a pseudo 5.1 effect
Lounge: Panasonic TX-P60ZT65B (calibrated), Pioneer SC-LX75, Denon DPB-2012, Sky-HD1TB, PS4, Xbox 360, Apple-TV, Atacama Equinox AV stand, Monitor Audio Silver RX8, RXC, RX-FX, RXW-12. Kitchen: Pioneer XC-HM81, Monitor Audio Bronze BX2. Bedroom: Samsung UE37D6510, Samsung BD-C5900, Sky-HD, Pioneer N-50, Rotel RC-03 (pre-amp), Rotel RB-9708X (power-amp), Mordaunt-Short MS914
I may be wrong and often are but I think all 'stereo' from sky is in pl2. Originally stereo, then nicam, now pl2. Its a stereo signal with additional modulated info for capable receivers. Most all of them for some years. Only of academic interest but thats the beauty of forums and this interweb thingybob.
Either or it will work for me. Cheers
Quick update. Dolby prologic 2 working thru denon avr2113 using arc from sky box. Thanks the reassurance !
+1 to that
PanasonicTX-P46GT30B..Yamaha RX-A1010...Music Fidelity M3i...OPPO105EU...KEFR100/R200C/3001SE/HTB2SE...SkyHD2TB...QED Copper Speaker Cable /HDMI/Analogue...PS3...IPAD2
© 2013 Haymarket Publishing